A chain guide made of a PU resin slider and duralumin plate with excellent wear resistance and resilience. PU resin is used in areas that are prone to impact and trouble, reducing the load on the swing arm mounting stay. The 3D designed slider releases impact from all directions. A duralumin plate designed specifically for the vehicle ensures the guiding performance required for rigidity.

The ZETA RACING brand is a Japan Planning product planned and designed by Dirt Freak Co., Ltd. [Please note] When installing, please apply a removable low to medium strength screw locking agent. - Periodically check the slider for wear.・When installed on a trail vehicle, the speed of wear will vary depending on the number of teeth, as it is designed with improved guiding performance similar to that of a racer. (Maximum number of guns up to 48) Compatible vehicles CRF250L/M '12-20, CRF250L (MD47) '21-23, CRF250L(S) (MD47) '21-23, CRF250RALLY '18-20, CRF250RALLY (MD47) ' 21-23 ,CRF250RALLY(S) (MD47) '21-23 ,CRF300L '21-22 ,CRF300L RALLY '21-22 (*1 The number of rear sprockets is higher than the stock one because the guiding performance is improved to the same level as the racer. The range of change is narrow.If the chain adjuster is moved too far forward when the number of teeth is increased, interference may occur.*2Depending on the position of the chain adjuster, the end of the guide block may interfere with the hub. It is necessary to adjust the adjuster or cut the guide block to prevent interference.)


Manufacturer: Dirtfreak Brand: ZETA RACING Model Name: ‎Chain guide
Package size: ‎28 x 14.4 x 4.9 cm; 330 g
Product model number: ‎ZE82-1082
Color: ‎Red
Certification: ‎Initial defects only
>Product weight: ‎330 g